Placing A Multipoint Call - Polycom RealPresence Group 300 User Manual

User's Guide for the Polycom RealPresence Group Series

Placing a Multipoint Call

Polycom, Inc.
You cannot host multipoint calls with a RealPresence Group 300 or 550 system.
How you place a multipoint call depends on whether you're using a
RealPresence Group system with multipoint capabilities or a bridge such as a
Polycom RMX conference platform. The number of sites allowed in the call is
determined by the capabilities of the system hosting the call.
To place a multipoint call by adding sites to a call:
1 Call the first site.
2 After the call connects, press
dialing keypad.
3 Place a call to the next site. For more information, refer to
on page 9.
4 Repeat the above steps until all sites are connected.
After you have placed the first call, the Add a Call menu is displayed instead of
the Place a Call menu.
To place a multipoint call using Contacts:
1 Using your remote control, select
select Contacts.
2 Highlight an entry in the Contacts list.
3 To place the call, press
on the remote control to open the
> Place a Call or Add a Call and
or navigate to Call.
Placing a Call
27