Slides/Powerpoint Presentations; How To Load A Presentation Onto Your Viewstation; How To View A Presentation On The Viewstation - Polycom VIEWSTATION Training Manual

End-User Training Guide: ViewStation
SLIDES/POWERPOINT PRESENTATION
PowerPoint presentations can be run over the ViewStation either via the LAN
or with a direct connection. The following is required:
Microsoft Windows 95
•
Laptop with 10mpbs Ethernet LAN Card
•
Ethernet Cable
•
Office 97 Microsoft PowerPoint Presentation – Office 97
•
Internet Explorer 3.02 or 4.0
•
ViewStation Welcome Page.

How to View a Presentation on the ViewStation

1. The thumbnail sketches are loaded. The PC must keep the file loaded until the
presentation has been completed.
2. Press SLIDES on the keypad. Select the presentation that you have loaded on
the ViewStation. (Input the password if required.)
3. A small thumbnail of each slide will appear on the ViewStation monitor. Press the
SELECT button on any slide you wish to begin the presentation.
4. Use the LEFT or RIGHT arrow key to move forward or backward through the
presentation. If you wish to go to the beginning of the presentation press the UP
arrow or the DOWN arrow to access the end of the presentation.
How to Load a Presentation
Onto Your ViewStation
1. Load Internet Explorer and input the
IP Address of the ViewStation.
Microsoft Windows
Internet Explorer logo.
2. On the ViewStation
Welcome Page, choose
Select a Presentation.
3. Select Press Here to Select
a PowerPoint File.
4. pc Present provides the
option to place a password.
Select Please Press Here to
Select a Presentation bar.
5. Select a file and Open.
Press the pc Present button.
VSGi - Polycom ViewStation End-user Training Guide
For more
information
call
408-402-9000
13