Trunk Module Kits; Power Supplies - Avaya IP Office 3.0 Installation Manual

Small Office Install

Trunk Module Kits

Variant
BRI 8 (UNI) expansion kit
PRI 24 T1 Expansion Kit
WAN Expansion Kit
Notes:
1. For countries outside North America/CALA, use the ROW variant unless stated otherwise.
2. PRI T1trunks support both ISDN and Analog emulation. The default setting is 23B+1D and is
switchable in the installation software to become a 24B trunk.

Power Supplies

Common Lump-in-Line Power Supply units are supplied with each Avaya IP Office - Small Office Edition.
However, the power leads are county specific and must be ordered separately. These power leads are
earthed 3-pin and can only be used on Small Office Edition systems. The part numbers are as follows:-
Variant
IP Office - Power Lead (earthed)
IP Office - Power Lead (earthed)
IP Office - Power Lead (earthed)
IP Office - Power (earthed) Lead Pack 10 UK
IP Office - Power Lead (earthed) Pack 10 US
IP Office - Power Lead (earthed) Pack 10 EU CEE7/7
IP Office - Power Lead (earthed)
IP Office - Power Lead (earthed) Pack 10 China
Small Office Edition Installation Manual
IP Office 3.0
Country
ROW
NA
ALL
Country SAP Code
UK 700289747
EU CEE7/7 700289762
US 700289770
181567
181568
181569
China 700261977
182196
40DHB0002UKED Issue 3 (4th February 2005)
SAP Code
700262017
700185200
700289713
Page 14