Basic Button Programming - Avaya 4600 Series Installation Manual

B asic Button Programming
7 5 B
Most Avaya phones have programmable button against which IP Office actions can be programmed. Full
details of this are covered by the IP Office Button Programming and the IP Office Key and Lamp
Operation manuals.
This section covers only the basic elements of button programming.
Appearance Button Requirements
1. The first button must be a call appearance button.
2. Any other call appearance buttons must follow the first in a continuous block.
3. Except on phones with only two physical programmable buttons, the minimum recommend
number of call appearance buttons is 3.
4. No call coverage, bridged or line appearance buttons can be programmed until a user has call
appearance buttons.
5. Appearance buttons set on buttons not matched by the user's current associated phone are not
used and are ignored by the IP Office.
Installation Manual
IP Office 3.2 15-601042 Issue 14b (13th November 2007)
B. Phone Installation
Page 127