S Afety Statements; S Afety And Homologation Statements; L Ithium Batteries - Avaya 4600 Series Installation Manual

S afety Statements

1 0 B

S afety and Homologation Statements

1 0 1 B
•
The CE mark affixed to this equipment means that the module complies with the 1999/5/EC
(R&TTE), 89/336/EEC (EMC) and 72/23EEC (LVD) Directives.
•
Declaration of Conformity
The Declaration of Conformity (DoC) for the IP400 Office products is available within on the IP
Office Documentation CD (Engineer's Toolkit CD). .
•
This warning symbol is found on the base of IP403, IP406 V2, IP412 modules and on the base of
the IP400 Digital Station 80W PSU.
•
Refer to Trunk Interface Modules for information concerning which Trunk Interface module
variants are fitted in which country.
The Avaya IP400 Office modules are intended to be installed by 'Service Personnel' and it is the
responsibility of the Service Personnel to ensure that all subsidiary interconnected equipment is
wired correctly and also meet the safety requirements of IEC60950 or UL60950 where applicable.

L ithium Batteries

1 0 2 B
A lithium battery is fitted to the real time clock on IP Office control unit mother boards.
The Lithium battery must only be replaced by Avaya personnel or authorized representatives.
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according to the
Installation Manual
IP Office 3.2
WARNING
WARNING
manufacturer's instructions.
15-601042 Issue 14b (13th November 2007)
Page 317