The Ftp Screen; The Www Screen - ZyXEL Communications nwa1100-n User Manual

Chapter 12 Remote Management

12.5 The FTP Screen

Use this screen to upload and download the NWA's firmware using FTP. To use this feature, your
computer must have an FTP client.
To change your NWA's FTP settings, click REMOTE MGMT > FTP. The following screen displays.
Figure 53 Remote Management: FTP
The following table describes the labels in this screen.
Table 33 Remote Management: FTP
LABEL
FTP
Server Port
Server Access
Secured Client IP
Address
Secured Client
MAC Address
Apply
Reset

12.6 The WWW Screen

Use this screen to configure your NWA via the World Wide Web (WWW) using a Web browser. This
lets you specify which IP addresses or computers are able to communicate with and access the
NWA.
104
DESCRIPTION
You may change the server port number for a service if needed, however you must use
the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the NWA using this
service.
A secured client is a "trusted" computer that is allowed to communicate with the NWA
using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the MAC address that you specify to
access the NWAe using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
NWA1100-N User's Guide