Testing The Wireless Networks - ZyXEL Communications nwa1100-n User Manual

Next, click Wireless > Security. Select SecProfile3 and click Edit.
6
Select WPA-PSK in the Security Mode field. WPA-PSK provides strong security that is supported
7
by most wireless clients.
Enter the PSK you want to use in your network in the Pre-Shared Key field. In this example, the
8
PSK is ThisismyGuestWPApre-sharedkey. Click Apply.
Your guest wireless network is now ready to use.
9

4.2.5 Testing the Wireless Networks

To make sure that the three networks are correctly configured, do the following.
• On a computer with a wireless client, scan for access points. You should see the Guest_SSID
network, but not the SSID01 and VoIP_SSID networks. If you can see the SSID01 and
VoIP_SSID networks, go to its SSID Edit screen and make sure to select the Hidden SSID
check-box and click Save.
• Try to access each network using the correct security settings, and then using incorrect security
settings, such as the WPA-PSK for another active network. If the behavior is different from
expected (for example, if you can access the SSID01 or VoIP_SSID wireless network using the
security settings for the Guest_SSID wireless network) check that the SSID profile is set to use
the correct security profile, and that the settings of the security profile are correct.
NWA1100-N User's Guide
Chapter 4 Tutorial
37