ZyXEL Communications nwa1100-n User Manual page 107

Table 35 Remote Management: SNMP (continued)
LABEL
Access Type
Authentication
Protocol
Privacy Protocol
Enable SNMPv3
User
User Name
Password
Confirm Password
Access Type
Authentication
Protocol
Privacy Protocol
SNMP
Server Port
Server Access
NWA1100-N User's Guide
DESCRIPTION
Specify the SNMP administrator's access rights to MIBs.
Read/Write - The SNMP administrator has read and write rights, meaning that the
user can create and edit the MIBs on the NWA.
Read Only - The SNMP administrator has read rights only, meaning the user can collect
information from the NWA.
Select an authentication algorithm used for SNMP communication with the SNMP
administrator.
MD5 (Message Digest 5) and SHA (Secure Hash Algorithm) are hash algorithms used
to authenticate SNMP data. SHA authentication is generally considered stronger than
MD5, but is slower. Select None to not use authentication.
Specify the encryption method used for SNMP communication with the SNMP
administrator.
DES - Data Encryption Standard is a widely used (but breakable) method of data
encryption. It applies a 56-bit key to each 64-bit block of data.
AES - Advanced Encryption Standard is another method for data encryption that also
uses a secret key. AES applies a 128-bit key to 128-bit blocks of data.
None - no encryption is used.
Select the check box to enable the SNMP user account for authentication with SNMP
managers using SNMP v3.
Specify the user name of the SNMP user account.
Enter the password for SNMP user authentication.
Retype the password for confirmation.
Specify the SNMP user's access rights to MIBs.
Read Only - The SNMP user has read rights only, meaning the user can collect
information from the NWA.
Read/Write - The SNMP user has read and write rights, meaning that the user can
create and edit the MIBs on the NWA.
Select an authentication algorithm used for SNMP communication with the SNMP user.
MD5 (Message Digest 5) and SHA (Secure Hash Algorithm) are hash algorithms used
to authenticate SNMP data. SHA authentication is generally considered stronger than
MD5, but is slower. Select None to not use authentication.
Specify the encryption method used for SNMP communication with the SNMP user.
DES - Data Encryption Standard is a widely used (but breakable) method of data
encryption. It applies a 56-bit key to each 64-bit block of data.
AES - Advanced Encryption Standard is another method for data encryption that also
uses a secret key. AES applies a 128-bit key to 128-bit blocks of data.
None - no encryption is used.
You may change the server port number for a service if needed, however you must use
the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the NWA using this
service.
Chapter 12 Remote Management
107