ZyXEL Communications nwa1100-n User Manual page 192

Appendix E Text File Based Auto Configuration
Use the following procedure to have the AP download the configuration file.
Table 60 Configuration via SNMP
STEPS
Step 1
Step 2
Step 3
Step 4
Verifying Your Configuration File Upload Via SNMP
You can use SNMP management software to display the configuration file version currently on the
device by using the following MIB.
Table 61 Displaying the File Version
ITEM
pwCfgVersion
Troubleshooting Via SNMP
If you have any difficulties with the configuration file upload, you can try using the following MIB 10
to 20 seconds after using SNMP to have the AP download the configuration file.
Table 62 Displaying the File Version
ITEM
pwTftpOpStatus
192
MIB VARIABLE
pwTftpServer
pwTftpFileName
pwTftpFileType
pwTftpOpCommand
OBJECT ID
1.3.6.1.4.1.890.1.9.1.2
OBJECT ID
1.3.6.1.4.1.890.1.9.1.6
VALUE
Set the IP address of the TFTP server.
Set the file name, for example, g3000hcfg.txt.
Set to 3 (text configuration file).
Set to 2 (download).
DESCRIPTION
This displays the current configuration file version.
DESCRIPTION
This displays the current operating status of the TFTP
client.
NWA1100-N User's Guide