Security: Wpa, Wpa2 Or Wpa2-Mix - ZyXEL Communications nwa1100-n User Manual

Chapter 7 Wireless Security Screen
The following table describes the labels in this screen.
Table 17 Security: 802.1x + Static WEP for Wireless Client
LABEL
Security Settings
Profile Name
Security Mode
Data Encryption
Passphrase
Generate
Key 1 to
Key 4
IEEE802.1x Authentication
EAP Type
User Information
Username
Password
Apply
Reset
Back

7.4.4 Security: WPA, WPA2 or WPA2-MIX

This screen varies depending on whether you select Access Point, Multi SSID or Wireless Client
in the Wireless > Wireless Settings screen.
80
DESCRIPTION
This is the name that identifying this profile.
Choose the same security mode used by the AP.
Select 64-bit WEP, 128-bit WEP or 152-bit WEP to use 802.1x authentication with a
static WEP key.
Enter the passphrase or string of text used for automatic WEP key generation.
Click this to get the keys from the Passphrase you entered.
The WEP keys are used to encrypt data. Both the NWA and the wireless device to which
the NWA is connecting must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
("0-9", "A-F").
If you chose 152-bit WEP, then enter 16 ASCII characters or 32 hexadecimal characters
("0-9", "A-F").
You must configure all four keys, but only one key can be activated at any one time.
The options on the left refer to EAP methods. You can choose either TLS, LEAP, PEAP or
TTLS.
The options on the right refer to authentication protocols. You can choose between
MSCHAPv2 and GTC.
Supply the username of the account created in the RADIUS server.
Supply the password of the account created in the RADIUS server.
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
Click Back to return to the previous screen.
NWA1100-N User's Guide