Mac Filter Setup; Testing The Connection And Troubleshooting - ZyXEL Communications nwa1100-n User Manual

Chapter 4 Tutorial

4.3.4 MAC Filter Setup

One way to ensure that only specified wireless clients can access the FTP server is by enabling MAC
filtering on NWA (B) (See
Go to Wireless > MAC Filter. Select MacProfile1 and click Edit.
1
Select Allow Listed in the Access Control Mode field. Enter the MAC addresses of the wireless
2
clients (W, Y and Z) you want to associate with the NWA. Click Apply.
Now, only the authorized wireless clients (W, Y and Z) can access the FTP server.

4.3.5 Testing the Connection and Troubleshooting

This section discusses how you can check if you have correctly configured your network setup as
described in this tutorial.
• Try accessing the FTP server from wireless clients W, Y or Z. Test if you can send or retrieve a
file. If you cannot establish a connection with the FTP server, do the following steps.
Make sure W, Y and Z use the same wireless security settings as A and can access A.
1
Make sure B uses the same wireless and wireless security settings as A and can access A.
2
44
Chapter 9 on page 87 for more information on MAC Filter).
NWA1100-N User's Guide