Introducing The Web Configurator; Accessing The Web Configurator; Resetting The Nwa - ZyXEL Communications nwa1100-n User Manual

This chapter describes how to access the NWA's web configurator and provides an overview of its
screens.

2.1 Accessing the Web Configurator

Make sure your hardware is properly connected and prepare your computer or computer network to
1
connect to the NWA (refer to the Quick Start Guide).
Launch your web browser.
2
Type "192.168.1.2" as the URL (default). The login screen appears.
3
Figure 11 The Login Screen
Type "admin" as the (default) username and "1234" as the (default) password. Click Login.
4
You should now see the Status screen. See
screen.
Note: For security reasons, the NWA automatically logs you out if there is no activity for
longer than five minutes after you log in. If this happens, simply log back in again.

2.2 Resetting the NWA

If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the rear panel of the NWA. This replaces the current configuration file with the factory-
NWA1100-N User's Guide

Introducing the Web Configurator

C
H A PT ER
Chapter 2 on page 20 for details about the Status
2
20