Table of Contents
Advertisement
4. Click the OK button to dismiss the About CERDisp dialog box. on the VX3Plus desktop by clicking the OK button in the
LXEConnect window on the PC desktop. The dialog box automatically times out and disappears after approximately 30
seconds.
5. The VX3Plus can now be configured from the LXEConnect window. Input from the PC's mouse and keyboard are
recognized as if they were attached to the VX3Plus.
6. When the remote session is completed, terminate the LXEConnect program by selecting File > Exit or clicking on the X
in the upper right hand corner to close the application, then disconnect the ActiveSync cable.
Note:
VX3Plus cannot go into Suspend mode until after a warmboot. If using Power Management on a
VX3Plus, always warmboot the VX3Plus when finished using LXEConnect.
3-29
Advertisement
Table of Contents
