Table of Contents
Advertisement
Options
Option
Computer is connectable
Computer is discoverable
Prompt if devices request to
pair
Continuous Search
Filtered Mode
Printer Port - COM9
Logging
Computer Friendly Name
Function
This option is Enabled by default.
Disable this option to inhibit VX3Plus connection initiated by a Bluetooth scanner.
This option is Disabled by default.
Enable this option to ensure other devices can discover the VX3Plus.
This option is Enabled by default.
A dialog box appears on the VX3Plus screen notifying the user a Bluetooth device requests to
pair with the VX3Plus.
The requesting Bluetooth device does not need to have been Discovered by the VX3Plus
before the pairing request is received.
Tap the Accept button or the Decline button to remove the dialog box from the screen.
Note:
In some cases, if a Bluetooth device is already paired this setting
cannot be changed. If this is the case, an error message is displayed
and the option is not changed. The Bluetooth device must be
disconnected before changing this setting.
This option is Disabled by default.
When enabled, the Bluetooth connection never stops searching for a device it has paired with
when the connection is broken (such as the paired device entering Suspend mode, going out of
range or being turned off). When disabled, after being enabled, the VX3Plus stops searching
after 30 minutes. This option draws power from the Main Battery.
This option is Enabled by default.
Determines whether the Bluetooth client discovers and displays all serial Bluetooth devices in
the vicinity (Filtered Mode is disabled/unchecked) or the discovery result displays Bluetooth
scanners and printers only (Filtered Mode is enabled/checked).
When Filtered Mode is disabled, the VX3Plus can pair with up to four Bluetooth devices, with a
limit of one Bluetooth scanner, one Bluetooth printer, one PAN, and one DUN connected at the
same time. More than one HID device can be connected but only one Bluetooth mouse and one
Bluetooth keyboard.
A Warmboot is required every time Filtered Mode is toggled on and off.
This option is Disabled by default.
This option assigns Bluetooth printer connection to COM9 instead of COM19. To enable this
option, Filtered Mode must be disabled.
This option is Disabled by default.
When logging is enabled, the VX3Plus creates bt_log.txt and stores it in the /System folder.
Bluetooth activity logging is added to the text file as activity progresses. A bt_log_bak.txt file
contains the data stored by bt_log.txt prior to reboot.
During a reboot process, the VX3Plus renames bt_log.txt to bt_log_bak.txt. If a file already
exists with that name, the existing file is deleted, the new bt_log_bak.txt file is added and a
new bt_log.txt is created.
Default: Computer System Name (System Panel > Device Name tab).
3-63
Advertisement
Table of Contents
