Table of Contents
Advertisement
At this point, the OS will automatically install the Remote Management Utility (RMU) after the VX3Plus reboots.
Enabler Uninstall Process
To remove the Avalanche Enabler from the VX3Plus:
Delete the Avalanche folder located in the \System directory.
l
Warm boot the VX3Plus.
l
The Avalanche folder cannot be deleted while the Enabler is running. See
If sharing errors occur while attempting to delete the Avalanche folder, warm boot the VX3Plus, immediately delete the
Avalanche folder, and then perform another warm boot.
Stop the Enabler Service
To stop the Enabler from monitoring for updates from the Mobility Center Console:
1. Open the Enabler Settings Panels by tapping the Enabler icon on the VX3Plus desktop.
2. Select File > Settings.
3. Select the Startup/Shutdown tab.
4. Select the Do not monitor or launch Enabler parameter to prevent automatic monitoring upon startup.
5. Select Stop Monitoring for an immediate shutdown of all Enabler update functionality upon exiting the user interface.
6. Click the OK button to save the changes.
7. Reboot the VX3Plus if necessary.
or
1. Open the Enabler Settings Panels by tapping the Enabler icon on the VX3Plus desktop.
2. Select File > Settings.
3. Select the Preferences tab.
4. Select Do not monitor to prevent automatic monitoring upon Startup.
5. Select Exit Application for an immediate shutdown of all Enabler update functionality upon exiting the user interface.
6. Click the OK button to save the changes.
7. Reboot the VX3Plus if necessary.
4-2
Stop the Enabler
Service.
Advertisement
Table of Contents
