Table of Contents
Advertisement
Reboot
When the Windows CE desktop is displayed or an application begins, the power up (or reboot) sequence is complete.
Warmboot
A warmboot reboots the computer without erasing any registry data. However, any applications installed to RAM are lost, as is
all data in RAM. This occurs because the operating system is stored on the flash drive, but must be loaded into RAM to run.
All registry configurations are automatically preserved. Any applications stored as .CAB files in the System folder and
configured in the Registry to persist are reinstalled on boot up by the Launch utility.
To warmboot the VX3Plus, select Start > Run and type
warmboot
and tap the OK button.
Coldboot
A coldboot reboots the computer, erases all registry data and returns the computer to factory default settings. In order to be
preserved, applications and data must be stored in the System folder. Registry information is not preserved. Only factory
default applications and drivers stored as .CAB files in the System folder are loaded by Launch.
A coldboot is initiated by running the Coldboot application in the Windows folder. This application automatically cold boots the
VX3Plus, erasing any customer applied registry changes and returning the VX3Plus to its factory settings.
To coldboot the VX3Plus, select Start > Run and type
coldboot
and tap the OK button.
1-2
Advertisement
Table of Contents
