Using Bluetooth; Bluetooth Devices Display - Before Discovering Devices; Initial Configuration - Honeywell VX3Plus Reference Manual

Using Bluetooth

Start > Settings > Control Panel > Bluetooth or Bluetooth icon in taskbar or Bluetooth icon on desktop
Bluetooth taskbar icon
The VX3Plus default Bluetooth setting is Enabled.
®
The VX3Plus Bluetooth
Prerequisite: The Bluetooth devices have been setup to allow them to be "Discovered" and "Connected/Paired". The System
Administrator is familiar with the pairing function of the Bluetooth devices.

Bluetooth Devices Display - Before Discovering Devices

Note: When Filtered Mode is enabled, only certain Bluetooth printers or Bluetooth scanners/imagers are
recognized and displayed in the Bluetooth panel. All other Bluetooth devices are ignored.

Initial Configuration

1. Select Start > Settings > Control Panel > Bluetooth or tap the Bluetooth icon in the taskbar or on the desktop.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth VX3Plus default name is
determined by the factory installed software version. Honeywell strongly urges assigning every VX3Plus a unique name
(up to 32 characters) before Bluetooth Discovery is initiated.
4. Check or uncheck the VX3Plus Bluetooth options on the Settings and Reconnect tabs.
5. Tap the OK button to save your changes or the X button to discard any changes.
module is designed to Discover and pair with nearby Bluetooth devices.
3-71