Usb-C Connector - Honeywell VX3Plus Reference Manual

USB-C Connector

When present, the USB client connector (labeled "USB-C") is an industry-standard RS-232 9-pin "D" male connector.
The optional USB cable is required to adapt the connection to a standard USB connector.
Caution: Do not use the USB labeled endcap port for tethered scanners or other serial devices.
USB Client Cable
ActiveSync : Connect from USB-C port to USB Type A Host – a laptop/desktop, etc.
2-10
DB9 Connector Signal
1 Host Detect
2 Not Used
3 D+
4 Not Used
5 Ground
6 Not Used
7 D-
8 Not Used
9 Not Used
USB Client Port on Endcap
VX3Plus DB9 Connector
USB Client Connector
USB Connector
1
3
4
2