Adapters - Honeywell VX3Plus Reference Manual

Adapters

Note: Review the network settings configuration utilities and the default values before setting All Adapters
to Enable in the Adapters applet.
Manage
When enabled, the Enabler will control the network settings. This parameter cannot be configured from the Ava-
Network
lanche Mobility Center Console and is enabled by default.
Settings
Manage When enabled, the Enabler will control the wireless settings. This parameter cannot be configured from the Ava-
Wireless lanche Mobility Center Console and is disabled by default. For Summit clients, Manage Wireless Settings should
Settings not be checked as configuration packages provide more radio configuration options.
Current
Lists all network adapters currently installed on the VX3Plus.
Adapter
Primary Indicates if the Enabler is to attempt to configure the primary adapter (active only if there are multiple network
Adapter adapters).
Icon on Places the Avalanche icon in the Avalanche taskbar that may, optionally, override the standard Windows task-
taskbar bar.
Use Ava-
lanche
The Enabler will apply all network settings sent to it by the Mobile Device Server.
Network
Profile
Avalanche
Icon
Selecting the Avalanche Icon will access the Avalanche Network Profile tab which will display current network
(varies by
settings.
Enabler
version)
4-21