Table of Contents
Advertisement
On the
Main
Tab, click the
l
If using a single profile, edit the default profile with the parameters for your network. Select the Default profile from the
l
pull down menu.
Make any desired parameter changes as described in the applicable following section determined by network security
l
type and click the Commit button to save the changes.
IMPORTANT – Remember to click the Commit button after making changes to ensure the changes are saved. Many versions
of the SCU display a reminder if the Commit button is not clicked before an attempt is made to close or browse away from the
tab in focus if there are unsaved changes.
If changes are made to the stored credentials, click Commit to save those changes first before making any additional changes.
5-22
Admin Login
button and enter the password.
Advertisement
Table of Contents
