Table of Contents
Advertisement
Parameter
TX Diversity
RX Diversity
Frag Thresh
Default
How to handle antenna diversity when transmitting packets to the Access
Point.
Options are:
The options for the TX Diversity parameter should be set, based on the
antenna configuration, as follows:
BG: On
A: Main Only
Contact your
installed on your VX3Plus.
How to handle antenna diversity when receiving packets from the Access
Point.
Options are:
The options for the RX Diversity parameter should be set, based on the
antenna configuration, as follows:
BG: On-Start on
Main
A: Main Only
Contact your
installed on your VX3Plus.
If the packet size (in bytes) exceeds the specified number of bytes set in the
fragment threshold, the packet is fragmented (sent as several pieces instead
2346
of as one block). Use a low setting in areas where communication is poor or
where there is a great deal of wireless interference.
Options are: Any number between 256 bytes and 2346 bytes.
Main only (use the main antenna only)
Aux only (use the auxiliary antenna only)
On (use diversity or both antennas).
representative
if you have questions about the antenna(s)
Main Only (use the main antenna only)
Aux Only (use the auxiliary antenna only)
On-start on Main (on startup, use the main antenna)
On-start on Aux (on startup, use the auxiliary antenna).
representative
if you have questions about the antenna(s)
Function
5-17
Advertisement
Table of Contents
