Table of Contents
Advertisement
Mixer
Start > Settings > Control Panel > Mixer
The VX3Plus has a speaker. It is active when a headset is not connected to the device.
Use the settings on these panels to adjust the volume, record gain and sidetone for microphone input, speaker and speaker
output.
Headsets can be enabled, disabled and selected using these panels.
Factory Default Settings
Master Volume
Record Gain
Sidetone
Input
Input Boost
+6db Output Boost
Select the input for the mixer. Move the sliders up and down, or tap the up and down arrows, to adjust the decibel level.
Note:
Set Input to None when using stereo headphones. Set Input to Mic1 when using a mono headset
with microphone.
-10.5 dB
22.5 dB
12.0 dB
None
Dimmed
Disabled
3-97
Advertisement
Table of Contents
