Hearth Requirements - Travis Industries 35 CB Australian Owner's Manual

Installation

Hearth Requirements

• The fireplace must be placed on a wood or non-combustible sub-floor.
• No hearth is required.
N O T E : Carpeting or other floor covering (e.g. linoleum, wood flooring) must not protrude 3/4" (19
mm) above the base of the fireplace. The fireplace must be raised to accommodate any
flooring thicker than 3/4" (19 mm).
HINT : We strongly suggest using a tile or non-combustible hearth in front of the fireplace. This
protects the area in front of the fireplace from heat dis-coloration or off-gassing. Dragon
Wholesaling can not be responsible for floor discoloration in front of the fireplace.
HINT : If using a 36-DV Face, please be aware that a 1-1/8" (29 mm) gap will appear below the face.
We suggest a non-combustible hearth in front of the face to conceal this area.
Maximum 3/4"
(19 mm)
Travis Industries
(for qualified installers only)
9 3 5 0 8 1 3 4
Carpeting or other floor covering
(e.g. linoleum, wood flooring) must
not protrude 3/4" (19 mm) above
the base of the fireplace. The
fireplace must be raised to
accommodate any flooring thicker
than 3/4" (19 mm).
4 0 3 0 6 2 4
9