Log Installation - Travis Industries 35 CB Australian Owner's Manual

Finalizing the Installation
? If converting this unit to propane, do so now (see the instructions on page 38).
? If installing the fireback, do so now (see the instructions on page 41)
2 Install the log set, kibbles, and glowing embers (see the instructions included with the embers).
Warning: Failure to position the parts in accordance with these diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury.
Place the front logs in place.
b
The holes in the logs fit over
the pins on the burner pan.
The logs should look like
this when in place.
Place the embers on this ledge at the
d
front of the firebox . Do not place the
embers over the burner holes.
Travis Industries
Place the rear log at the back
a
of the burner pan.
9 3 5 0 8 1 3 4
(for qualified installers only)
This notch fits behind
the pilot assembly.
Place the right and left
c
twigs as pictured. The
pins on the log insert into
the holes in the twigs.
2 5
4 0 3 0 6 2 4