Resetting Toner Status; Photo Processing Method - Kyocera KM-1820 Advanced Operation Manual

System Settings
System Menu/
Counter
or
Copy Setting
Enter
or
Photo Processing
Enter
System Menu/
Counter
or
Common Setting
Enter
or
Toner Setting
Enter
5-4

Photo Processing Method

1
Access Photo Processing.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
shows Completed and returns to the Copy Setting screen.
Item
Error diffusion
Dithering

Resetting Toner Status

To ensure the correct information is displayed for the toner status, the toner gauge
must be reset after replacing the toner container.
Setting Menu
Toner Gauge Rset (Toner
Gauge Reset)
To ensure the correct toner status is displayed, do not perform this procedure unless
you have replaced the toner container.
1
Access Toner Setting.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Press or
displayed.
Press left Select. The display shows Completed and returns to the Toner
Setting screen.
to select the processing method and press Enter. The display
Description
This is the standard method that should be used
and is the factory default setting. Copies are
clearer if using originals with both text and photos.
Use this method for originals containing mainly
photos. When using the scanning or printing
functions, image processing is accomplished using
the Dithering setting.
Description
The toner counter is reset and the amount of toner
remaining will be printed out on the Status Page as
100%.
to select Toner Gauge Rset and press Enter. Are you sure? is
ADVANCED OPERATION GUIDE