Sending A Fax - Canon imageRUNNER Advance C5255 Basic Operation Manual

Sending a Fax

This section describes the fl ow of basic fax operations.
An optional product is required to use the Fax function.
1
Placing Originals
Place the original on the feeder or the platen glass.
Placing originals in the feeder
Adjust the slide guides to fi t the size of your originals. Neatly place
your originals with the side to be copied face up.
Placing originals on the platen glass
Open the feeder/platen cover.
Place your originals face down.
Gently close the feeder/platen cover.
• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/
PIN). If the Copy Card Reader-F1 is attached, fi rst insert a control card.
• If a login service, such as Department ID Management or SSO-H has been set, press
• The send settings for the last send job may be retained.
- To cancel the settings, press
- The specifi ed destinations are not retained.
32
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012
2
Select [Fax] from the Main Menu screen.
(Reset).
Selecting Function
Press [Fax].
Fax Basic Features screen is displayed.
You can set various facsimile functions. For more
information, see from p. 34 to p. 37 in this manual.
(Log In/Out) to log out.