Specify The Destination - Canon imageRUNNER Advance C5255 Basic Operation Manual

3

Specify the destination.

Enter the fax number.
Enter the fax number using the numeric keys.
If you want to enter two or more fax numbers, press
[OK]  enter the next destination.
You can specify the destination using the
one-touch buttons or [Address Book]. For more
information on storing the destination, see
e-Manual > Fax.
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012
4
Start Sending the Fax
After specifying the settings, press
Press (Start).
If the following screen appears, press
to scan the next original. After all of the originals
are scanned, press [Start Sending].
When sending is complete, remove your originals.
After a job is sent, the send settings may be
retained except the specifi ed destinations.
To cancel the settings, press
To send other jobs with the same settings,
specify destinations for the jobs as the
destination specifi ed for the previous job is not
retained.
(Start) .
(Start)
(Reset).
33