Loading Paper Into The Paper Deck Unit-B2 (Optional) - Canon imageRUNNER Advance C5255 Basic Operation Manual

Loading Paper into the Paper Deck Unit-B2 (Optional)

If there is no paper in the paper deck unit when you select it, or the paper deck unit runs out of paper during printing, a screen
prompting you to load paper appears on the touch panel display.
Follow the procedure below to load paper into the paper deck unit.
When handling paper, take care not to cut your hands on the edges of the paper.
• The Paper Deck Unit-B2 can only accommodate paper from 14 lb bond to 60 lb cover (52 to 163 g/m
multi-purpose tray to load paper that is heavier.
• If paper runs out and printing is stopped when you are printing in the Staple mode, do not remove the output sheets that are
waiting to be stapled. (Printing and stapling resume after you clear the paper jam.)
• Paper Deck Unit-B2 is an optional product.
• Only load LTR paper into the Paper Deck Unit-B2. Paper cannot be loaded horizontally.
• If a message prompting you to load paper appears during printing, the remaining prints are automatically made after you load
the correct paper. If you select a diff erent paper source, the remaining prints are made after you press [OK].
Open the paper deck unit.
1
If the machine is in the Sleep mode (the touch panel is not displayed, and only
may be unable to open the paper deck unit. In this case, press
and then press the open button on the paper deck unit.
70
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012
2
) in weight. Use the
1. Press the open button.
2. Open the paper deck unit.
The inside lifter automatically
descends to the paper loading
position.
(Energy Saver) is lit), you
(Energy Saver) to reactivate the machine,