Preparing The Envelopes - Canon imageRUNNER Advance C5255 Basic Operation Manual

Preparing the Envelopes

This section explains how to prepare the envelopes before loading them into the paper drawer.
Using curled, creased, or folded envelopes may cause paper jams. Load envelopes after following the procedure below.
Neatly align the envelopes.
1
Hold down the four corners of the envelopes fi rmly, so that they and the sealed
2
or glued portion stay fl at.
* Flap
• If you use envelopes that have glue attached to their fl aps, the glue may melt due to the heat and
pressure of the fi xing unit.
• Take particular care to spread the envelopes out in the direction that they will be fed.
• Do not print on the back side of the envelopes (the side with the fl ap).
• If the envelopes become fi lled with air, fl atten them by hand before loading them into the Envelope
Feeder Attachment-D1.
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012
*
1. Place the envelopes on a
clean, level surface, and
press all the way around the
envelopes by hand, in the
direction of the arrows, to
remove any curls.
Repeat this step fi ve times for
each set of fi ve envelopes.
*
77