Saddle Stitcher Unit Of The Booklet Finisher-J1 - Canon imageRUNNER Advance C5255 Basic Operation Manual

Saddle Stitcher Unit of the Booklet Finisher-J1

Check the location of the staple jam, and follow the procedure described below, while referring to the directions that appear on
the touch panel display, to remove the jammed staple.
• Make sure to close all covers and paper drawers of the machine before clearing any staple jams.
• Before clearing a staple jam in the saddle stitcher unit, remove all paper that has been output to the booklet tray.
The Booklet Finisher-J1 is an optional product.
Open the front cover of the fi nisher.
1
Pull out the saddle stitcher unit.
2
*1 Stapler Unit of the Saddle Stitcher Unit
*2 Saddle Stitcher Unit
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012
*1
1
*2
1. Grip the handle of the
saddle stitcher unit, and pull
out until it stops.
2. Pull the stapler unit of the
saddle stitcher unit towards
you, and then push it up.
157