Bidirectional Correction - Roland CJ-540 User Manual

3-5 Making Corrections for Printing

Bidirectional Correction

This adjusts for misalignment that occurs during bidirectional printing. Perform adjustment for bidirectional correction
in situations such as the following.
• When media is replaced with a different type
• When the head height has been adjusted
• When using in a location subject to large changes in temperature
Bidirectional correction is enabled only when performing bidirectional printing.
Setting Adjustment Value
Press the [MENU] key and [
1
the following screen appear on the display.
2 Press the [
appear on the display.
3 Press the [ENTER] key to start printing a test pattern.
After the printing test has finished, the media is fed to a position that lets you to view the test pattern.
4 Check the test pattern and choose adjustment
value (a value with no displacement).
Check the adjustment value, then press the [ENTER] key.
5
The media returns to its position when the printing test ended.
Chapter 3 - A Wide Variety of Operations
64
] key to make
] key to make the following screen
+3 +4 +5 +6 +7 +8 +9 +10
Adjustment value
(The value with no
displacement)
ADJUST BI-DIR
TEST PRINT
H6
H5
H4
H3
H2
H1
-30 -29 -3 -2 -1
NO.4 0 +1 +2 +3
H6
H5
H4
H3
H2
H1
-30 -29 -3 -2 -1
0 +1 +2 +3
NO.3
H6
H5
H4
H3
H2
H1
-30 -3
-29 -2 -1 0 +1 +2 +3
NO.2
H6
H5
H4
H3
H2
H1
-30 -29 -3 -2 -1
NO.1 0 +1 +2 +3
MENU
ADJUST BI-DIR
+4 +5 +6 +7 +8 +9 +10
+4 +5 +6 +7 +8 +9 +10
+4 +5 +6 +7 +8 +9 +10
+4 +5 +6 +7 +8 +9 +10