The following table describes the fields in this screen.
Table 26 LAN IP
LABEL
LAN TCP/IP
IP Address
IP Subnet Mask
Apply
Cancel
Advanced Setup
6.3.1 Configuring Advanced LAN Setup
To edit your ZyXEL Device's advanced LAN settings, click the Advanced Setup button in the
LAN IP screen. The screen appears as shown.
Figure 55 Advanced LAN Setup
The following table describes the labels in this screen.
Table 27 Advanced LAN Setup
LABEL
RIP & Multicast
Setup
RIP Direction
RIP Version
Multicast
P-660HW-Dx v2 User's Guide
DESCRIPTION
Enter the IP address of your ZyXEL Device in dotted decimal notation, for
example, 192.168.1.1 (factory default).
Type the subnet mask assigned to you by your ISP (if given).
Click Apply to save your changes to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Click this button to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
DESCRIPTION
Select the RIP direction from None, Both, In Only and Out Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group. The ZyXEL Device supports both IGMP
version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
Chapter 6 LAN Setup
99