Table of Contents
Advertisement
Chapter 2 Introducing the Web Configurator
Table 6 Status: Packet Statistics (continued)
LABEL
Status
TxPkts
RxPkts
Errors
Tx B/s
Rx B/s
Up Time
Collisions
Poll Interval(s)
Set Interval
Stop
2.4.6 Changing Login Password
It is highly recommended that you periodically change the password for accessing the ZyXEL
Device. If you didn't change the default one after you logged in or you want to change to a
new password again, then click Maintenance > System to display the screen shown next. See
Table 71 on page 196
Figure 15 System General
48
DESCRIPTION
This field displays Down (line is down), Up (line is up or connected) if you're
using Ethernet encapsulation and Down (line is down), Up (line is up or
connected), Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop
(dropping a call) if you're using PPPoE encapsulation.
This field displays the number of packets transmitted on this port.
This field displays the number of packets received on this port.
This field displays the number of error packets on this port.
This field displays the number of bytes transmitted in the last second.
This field displays the number of bytes received in the last second.
This field displays the elapsed time this port has been up.
This is the number of collisions on this port.
Type the time interval for the browser to refresh system statistics.
Click this button to apply the new poll interval you entered in the Poll Interval
field above.
Click this button to halt the refreshing of the system statistics.
for detailed field descriptions.
P-660H-Tx v2 User's Guide
Advertisement
Table of Contents
Troubleshooting
