Delete Module - Fire-Lite MS-9600 User Manual

Programming
MODULES
1=ADD
2=DELETE
3=EDIT
Modules Screen
60
When the last digit is keyed-in, the following screen will be displayed:
1=CONTROL
2=MONITOR
Add Module Screen #2
Pressing 1 for Control Module or 2 for Monitor Module will cause the following
screen to be displayed:
MODULE#
IS ADDED
Add Module Screen #3
The programmer can continue adding modules by pressing the ESC or left arrow
key which will return the display to the Add Module Screen #1.

3.6.2.2.2 Delete Module

Pressing 2 in the Modules Screen will display the Delete Module Screen which
allows the programmer to delete a specific module:
DELETE MODULE
ENTER MODULE#
***
Delete Module Screen
A flashing cursor will appear in the position of the first asterisk to the left. Using
the panel keypad, key in the module address such as 005. When the last digit is
keyed in, the following confirmation that the module has been deleted will be
displayed:
DELETE MODULE
MODULE#
IS DELETED
ADD MODULE
ADD MODULE
005
005
Master Programming Level
MS-9600 PN 51335:E 7/9/03