Section 3: Programming; Programming Data Entry - Fire-Lite MS-9600 User Manual

Programming Data Entry

SECTION 3
3.1 Programming Data Entry
MS-9600 PN 51335:E 7/9/03
Programming
Programming can be accomplished using the MS-9600 keypad or by connecting an
optional standard computer keyboard. The keyboard can be connected to the PS-2
connector J7 on the control panel main circuit board.
The information presented in this section refers to programming the MS-9600 via the
onboard keypad. If an optional computer keyboard is connected to the MS-9600 main
circuit board, the following table describes the keyboard keys which correspond to the
onboard keypad keys.
Keypad Keys
1st Event
CLR
ESC
RECALL
*
#
A - Z
0 - 9
(on QZ key)
—
/
•
ENTER
ACK/STEP
SILENCE
DRILL
RESET
Computer Keyboard Keys
Home
Delete
Esc
Insert
*
#
A - Z
0 - 9
Space bar
—
/
•
Enter
F1
F2
F3
F4
Programming
43