Adjusting Backpost Support Bracket - Invacare Spectra Blitz User Manual

9.3.3

Adjusting Backpost Support Bracket

Warning:
• This adjustment should only be made when the wheelchair is unoccupied.
• Take care not to damage any accessories fitted to the backrest.
The backpost support bracket can be adjusted in width. This should be used when adjusting seat
and backrest width (see "Seating" on page 51).
• Release the set screws (1) using a hex
wrench.
• Slide the seating and backrest to the
desired width.
•
Re-tighten the set screws using a hex
wrench
48