9.4.3
Adjusting the seat depth
The seat can be adjusted in depth. This can be useful if another type of seat cushion is to be fitted,
or to better accomodate the user.
Seat Frame Adjustment
• Remove the seat cushion (see
• Using a hex wrench loosen the adjustment screws.
• Gently pull/push the side of the seat, until it reaches the desired position.
• Re-tighten the adjustment screws using a hex wrench.
• Repeat for opposite side of chair.
Seat Board Adjustment
• Remove the seat cushion (see "Installing /
Removing Seat Cushion" on page 51).
• Using a hex wrench loosen the adjustment
screws.
• Gently pull/push the side of the seat, until
it reaches the desired position.
• Re-tighten the adjustment screws using a
hex wrench.
• Repeat for the opposite side of the chair.
"Installing / Removing Seat Cushion" on page
51).
53