9.3.2
Adjusting the backboard position
Warning:
• This adjustment should only be made when the wheelchair is unoccupied.
• Take care not to damage any accessories fitted to the backrest.
The backboard can be adjusted both in height and width (see "Seating" on page 51). This can be
useful if another type of back cushion is to be fitted.
• Remove the four fixing screws using a cross point screwdriver.
• Reposition the backboard.
• Replace and tighten the four fixing screws.
NOTE:
Ensure the backboard is firmly secured before fitting the cushion or using the wheelchair.
47