12.2.2 Drive Wheels
12.2.2.1 Repairing a flat tyre at the rear (wheel rim type 3.00-8")
Injury hazard! If the wheel is insufficiently secured during fitting, it can come off while
driving!
• Always tighten the torx screws which secure the wheel to the hub to a torque of 30 Nm when
refitting the drive wheels!
• Secure all bolts using a suitable screw blocker system (e.g. Loctite 243)!
Requirements:
• torque wrench with ...
• Allen bit 5 mm
• torx bit T40
• repair kit for tyre repair or a new inner tube
• talcum powder
• screw blocker Loctite (e.g. Loctite 243)
77