Legrest Height Adjustment - Invacare Spectra Blitz User Manual

NOTE:
The footplates are on the inside of the wheelchair when locked in place.
Removing
• Remove the legrest by pressing or pulling the lever (1).
• Swing the legrest out and pull it up out of its holder (2).
10.2

Legrest height adjustment

• Remove any accessory from the legrest(s).
• Remove the legrest from the wheelchair. Refer to
"Installing / Removing legrests" on page 62.
• Lay the legrest on a flat surface to simplify the following
steps.
• Loosen the legrest height adjustment screws (2) using a
hex-wrench.
• Reposition the lower section (with the footplate) to the
desired height.
• Tighten the legrest height adjustment screws. Ensure the
screws are secured.
• Repeat steps 1-5 for the opposite side of the wheelchair
legrest if necessary.
• Reinstall the legrest(s) onto the wheelchair. Refer to
"Installing / Removing legrests" on page 62.
63