9.4.2
Adjusting the seat width
The seat can be adjusted in width. This can be useful if another type of seat cushion is to be fitted,
or to better accomodate the user.
Caution:
•
Before making the following adjustments ensure that the backpost support bracket
adjustment screws are loose (see "Adjusting Backpost Support Bracket" on page 48), and the
backboard is removed (see "Adjusting the backboard position" on page 47).
• Failure to follow the above may result in damage to your Spectra Blitz
•
Remove the seat cushion (see "Installing /
Removing Seat Cushion" on page 51).
• Using a hex wrench loosen the adjustment
screws (1).
• Gently pull/push the side of the seat, until it
reaches the desired position.
• Re-tighten the adjustment screws using a hex
wrench.
• Repeat for the opposite side of the chair.
• Replace the seat cushion.
NOTE:
Ensure the backboard is firmly secured before fitting the cushion or using the wheelchair.
52
™
seat.