Konica Minolta bizhub 42 User Manual page 154

11
2/2 page
Item
[Name]
[Fax number]
[Favorites]
[Index]
[Line Settings]
11-4
Description
Enter the name to be registered in the address book using up
to 72 characters.
Enter the fax number for the destination up to 38 digits.
• [Tone]: Press to send push-button tones when pulse dial-
ing is being used. [T] appears in the screen.
• [Pause]: Press to insert a pause when dialing. [P] appears
in the screen.
• [-]: Press to insert a dash as a separator symbol while dial-
ing. This has no effect on the dialing.
• When the PBX connection is enabled and a call is made
from the internal line to the outside line, press [Pause] after
the outside line access number such as "0" so that dialing
is made more surely.
• When the PBX connection is enabled, [Outside] is dis-
played on the screen. When you select it, an [E] is dis-
played.
• If [Admin Settings] ö [Fax Settings] ö [Fax Function Set-
tings] ö [Confirm Addr (Register)] is set to [ON], a screen
for entering the fax number again appears after you press
[OK]. Enter the fax number and then press [OK].
d
Reference
For details on the Confirm Address function, refer
to the [User's Guide Administrator Operations].
For frequently used destinations, set to [ON]. This displays the
destination in the [Favorites] list, allowing it to be found more
easily.
Select the index.
Configure the line that is used to send faxes.
[Address Registration]
bizhub 42/36
11.1