Configuring Account Track Settings - Konica Minolta bizhub 42 User Manual

8.4 Parameter details

Configuring account track settings

When the [Account Track] settings are configured on this machine, you must enter the account name and
password.
Reference
- If you enter an incorrect account name or password for the [Account Track] settings on this machine or
have not enabled [Account Track], you will not be authenticated by this machine and the job will be dis-
carded when sending a fax.
d
Reference
If account track is not enabled in the [Configure] tab, [Account Track] cannot be performed. If you are using
account track, be sure to enable it in the [Device Option] list. For details, refer to page 8-12.
1
Click the [Basic] tab.
2
Click [Authentication/Account Track...].
3
Fill in the [Department Name] and [Password] boxes as registered in this machine.
% You can enter up to 8 characters for the [Department Name] and the [Password].
% Clicking [Verify] allows communication with this machine to confirm whether the entered user can
be authenticated. This function is available only when your computer is connected to and can com-
municate with this machine.
4
Click [OK].
Reference
- Even a registered account cannot send a fax if it is not permitted to use the fax function. For information
on the account track function, contact the administrator of this machine.
bizhub 42/36
8
8-19