3.2
Installation using Add Printer Wizard
3.2
Installation using Add Printer Wizard
This section describes how to install the driver using network connection (LPR/Port 9100).
To use LPR/Port 9100 printing, specify the port while installing the printer driver.
d
Reference
For setup procedures for other network connection methods (SMB, IPP/IPPS, Web service print), refer to
"User's Guide [Print Operations]".
3.2.1
Settings of this machine
Before you can use this machine through the network connection, you must configure the network settings
for this machine.
TCP/IP settings of this machine
In "TCP/IP Settings" of this machine, specify the IP address.
d
Reference
For details on setting the IP address of this machine, refer to "User's Guide [Network Administrator]".
RAW port number setting of this machine
When using Port 9100 printing, in "TCP/IP Settings" of this machine, enable the RAW port number (initial
setting: "9100").
d
Reference
For details on specifying the RAW port number of this machine, refer to "User's Guide [Network
Administrator]".
LPD setting of this machine
Before using LPR printing, enable LPD printing in "LPD Setting" of this machine.
d
Reference
For details on "LPD Setting" of this machine, refer to "User's Guide [Network Administrator]".
bizhub C652/C652DS/C552/C452 (Version 2)
3
3-5