Konica Minolta bizhub 42 User Manual page 28

3
No. Name
8
Interrupt
9 Stop
10 Start
11
Keypad
12 C (Clear)
13 Error Indicator
14 Data Indicator
15
Utility/Counter
16 Mode Memory
17 Access
7 CAUTION
- Do not apply extreme pressure to the touch panel, otherwise the touch panel may be scratched or dam-
aged. Never push down on the touch panel with force, and never use a hard or pointed object to make
a selection in the touch panel.
3-4
Description
Press this key to enter Interrupt mode. While the machine is in In-
terrupt mode, the indicator on the Interrupt key lights up in green.
To cancel Interrupt mode, press the Interrupt key again.
Pressing this key while copying, scanning or printing temporarily
stops the operation.
Press to start the copy, scan or fax operation.
Allows you to specify the number of copies. Allows you to enter the
magnification. Allows you to enter various settings.
Clears a value (such as the number of copies, a zoom ratio and
size) entered using the Keypad.
Flashes in orange if an error occurred.
Lights up in orange when the service representative is being called.
Flashes in blue while a print job is being received. Lights up in blue
when a print job is queued to be printed or while it is being printed.
Press to display the [Utility Settings] screen. From the [Utility Set-
tings] screen, settings can be specified for the parameters in the
[Accessibility], [Meter Count], [Address Registration], [User Set-
tings], and [Admin Settings] screens.
Allows you to register (store) the desired copy/fax/scan settings as
a program or to recall a registered program.
If user authentication or account track settings have been applied,
press the Access key after entering the user name and password
(for user authentication) or the account name and password (for
account track) in order to use this machine.
While logged on, press the Access key to log off and go back to
the authentication screen.
Control Panel 3.1
bizhub 42/36