Disassembly - Ford LRG-423 Service Manual

02-56 Engine Service, 2.3L 02-56
DISASSEMBLY AND ASSEMBLY (Continued)
Item
Part
Number
Description
1
6500 Valve Tappet
2 6513 Valve Spring
3 6518 Valve Spring Retainer Key
4 6514 Valve Spring Retainer
5 6571 Valve Stem Seal
6 6049
Cylinder Head
7 6507 Intake Valve
8 6505 Exhaust Valve
9 6510
Valve Guide
A - Press Seal into Place So Distance
from Bottom of Seal to Surface
of Cylinder Head Is 7.0-7.5mm
(0.28-0.30 inch)
B -
Valve Spring Installed Height
38.61-40.38mm (1.52-1.59 Inch)
Camshaft
12. NOTE: It is not necessary to remove sprocket
from camshaft unless camshaft or sprocket is to
be serviced.
Install Cam Sprocket Holding/Removing Tool
T74P-6256-B on sprocket. Using tool to hold
sprocket remove bolt and washer.
13. Install threaded puller insert in Cam Sprocket
Holding/Removing Tool T74P-6256-B and
remove sprocket.
14. Remove tool from sprocket.
15. NOTE: When positioning Front Cover Seal
Remover T74P-6700-B, make sure the jaws are
gripping the thin edge of the seal tightly before
operating the jack screw portion of the tool.
Install Front Cover Seal Remover T74P-6700-B.
Pull camshaft front seal.
16. Remove two screws and camshaft retaining
plate.
17. Remove camshaft.
FRONT OF ENGINE
A23939-A