Ford LRG-423 Service Manual page 172

03-63
Auxiliary Systems
03-63
GOVERNORS, ELECTRONIC DIAGNOSING AND TESTING (Continued)
INSTALLATION DIMENSIONS
(FOR REFERENCE ONLY)
DYNl-10851 CONTROLLER
112.7 ?I
(4.437L
t
5.56 *.I
[.219 ?.018]
134.9
- (5.312I
5.%*.4
(.219~.Olej
148.1 il.0
- [5.75r.o40]
PPD0051
Dimensions in mm, inches in brackets [ 1.
Calibration
Initial speed settings, as well as other parameters, can
be set using a special interface connector, and an IBM
compatible PC 286 minimum with 640K RAM, of which
512K of conventional RAM must be available. Also
required is a 1.44 Meg High Density floppy drive and a
VGA graphic display. Programming of the controller is
covered in a separate publication.