Camshaft Timing Belt Outer Cover; Installation - Ford LRG-423 Service Manual

02-l 6
Engine Service, 2.3L
02-I 6
2.3L ENGINE SERVICE (Continued)
Camshaft Timing Belt Outer Cover
1.
Loosen four fan and water pump pulley (8509)-to-
water pump bolts.
2. Rotate drive belt tensioner (6B209) and remove
drive belt (8620).
3. Remove four bolts, fan, and water pump pulley.
4. Remove timing belt outer cover retaining screw.
5. Release seven cover interlocking tabs and
remove outer timing belt cover.
SECTION
.
A23930-1
installation
1.
Position outer timing belt cover and secure by
snapping the seven interlocking tabs into place.
2.
Install timing belt cover retaining screw and
tighten to 8-12 Nom (70-106 lb-in).
3. Install water pump pulley and fan; snug bolts, but
do not tighten.
4. Install drive belt.
5. Using flex handle, rotate drive belt tensioner,
position drive belt, and rest tensioner pulley on
belt.
6. Tighten four clutch and pulley-to-water pump
bolts to 18-22 Nom (13-I 6 lb-ft).
Item
Part
Number
Description
1
6EOll
Outer Timing Belt Cover Assembly
2 8594 Water Outlet Connection
3 6303 Crankshaft
4 6E005 Inner Timing Belt Cover
5 N807419-S Plug (Part of 6E011)
6 6312
Crankshaft Pulley
7 6378 Crankshaft Pulley Retaining
Washer
8 N805044-S2
Bolt, M14-1.5 x 55
9 N808534-S2 Bolt, M6-1 x 17
10 - Pulse Wheel (Part of 6312)
11 6306
Crankshaft Sprocket
A -
Tighten to 127-165 Nom (93-l 21
Lb-Ft)
B - Tighten to 8-12 Nom (72-108 Lb-In)