Using The Telephone - Canon FAX-L2000 Facsimile Manual

Using the Telephone

Follow this procedure to use the telephone for voice communication if you have installed the
optional handset kit. (See Chapter 1, "Before You Start Using This Machine," in the Reference
Guide.)
10
10-2

Using the Telephone

1
Pick up the handset, or press
TEL=
2
When you hear the dial tone, specify the destination.
You can specify the destination using regular dialing, one-touch speed dialing,
coded speed dialing, or access code dialing. (See "Using Regular Dialing", on
p. 3-8, or "Using Speed Dialing", on p. 2-34.)
TEL=
NOTE
• If you notice that you made a mistake while the machine is dialing the number, press
(Stop) to return to the Standby mode
hang up the handset to cancel dialing.
3
When the other party answers your call, speak into the handset.
If you did not pick up handset in step 1, pick up the handset as soon as you
hear the other party answer. The other party cannot hear you until you pick up
the handset.
NOTE
• If the other party does not answer, or if the line is busy, hang up the handset, press
(Hook), or (Stop) to disconnect.
(Hook).
123 4567
start again. You can also press (Hook) or