Adjusting The Length Of A Pause - Canon FAX-L2000 Facsimile Manual

4
To enter a pause at the end of a number, press [Pause]
Pause
The pause at the end of a number appears as an uppercase <P>.
TEL NUMBER ENTRY
OK
TEL=03p123 4567P_
NOTE
• Keep in mind these important points about pauses:
* 4 seconds long in the U.K. and Hong Kong.

Adjusting the Length of a Pause

Follow this procedure to adjust the length of a pause entered within a number.
NOTE
• This procedure is effective only for adjusting the length of pauses entered within telephone numbers.
The 10 seconds pause entered at the end of a number cannot be adjusted.
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
Data
Registration
ADDITIONAL FUNCTIONS
- A pause entered within a number (p) is two seconds long.*
- You can add consecutive pauses (pp) by pressing [Pause]. Each additional pause
adds two seconds to the pause time.
- You can change the length of a pause entered within a number. (See "Adjusting the
Length of a Pause", on p. 2-3.)
- A pause at the end of a number (P) is 10 seconds long.
- You may have to insert one or more pauses at the end of a number to dial an overseas
number.
- You cannot insert a pause when you dial using the numeric keys after pressing
(Hook), or after picking up the handset.
1.PAPER SETTINGS
Read This Before Entering Telephone Numbers
[OK].
2
2-3